Carbide Tyre Pin/Nail
1. Tungsten carbide tyre pin/nail.
2. The grade: YG6, YG8 etc.
3.100%raw materials.
4. Various kinds of tyre pins.
5. Made from Electrolytic materials.
6. Special ingredient good performance with light weight.
We produces a series Tungsten Carbide Pins for the tyre stud/spike, due to the application of the double-action pressing machinery and the well-prepared materials, our carbide pins can be controlled within a very tight tolerance at +/-0.05mm.
1. Center of tyre nails:
Chemical composition: WC-80%+Co-10% (YT10)
Density: (g/cm3): 13.0-13.5
Hardbess HRA: >90(>1300HV30)
TRS Mpa: (N/MM2): 1660
Poposity: (ISO): <A02B02
Free carbon and and Graphite phase: <C00
N phase: E00
Grain size: (um): 1.2-1.8
Index of abrasive resistance: 71+/-7.5
The center color: Black
2. Cloth of tyre nails
Materia: Low carbon steel
Surface covering: Galvanizing
We produce different sizes and different shapes of tungsten carbide pins, studs, nails for the tyre stud, spike, shoes, horses, buses, trucks, etc.
The new tire studs can be easily installed and removed without professional installation tools. It can also be disassembled according to the season, when not being used the snow tire studs could be removed lightly and stored for use again in the following season. Choose appropriate size of new studs in the installation process in terms of the depth of tire thread.
Length ( H ) |
10mm, 11mm, 12mm, 13mm, 15mm |
Head Diameter ( D ) |
8.8mm , 8mm |
Shaft Diameter (D1) |
4.8mm, 5.2mm |
Weight(g) |
2.02, 2.03, 2.19, 2.44, 1.7, 1.8 |
Color |
S liver, gold, blue |
Surface |
Z inc coated |
Advantages of our carbide pins
1. We produce different sizes and different shapes of tungsten carbide pins, studs, nails for the tyre studs, spike, shoes, horses, buses, trucks, etc.
2. All of our materials for the carbide pins are made by our own Carbide Powder Plant, so you could get the products with excellent quality & favorable price.
4. Fully automatic manufacturing with advanced facilities under tough process control.
Our quality control:
1. All the raw materials are tested in terms of density, hardness and T. R. S before use.
2. Every product goes through in-process and final inspection
Audited Supplier 
){kind=link}
){kind=link}