High Bending Resistance T. C. T Ripping Saw Blade for Bamboo
Application:
Suitable for ripping cut softwood, hardwood, plywood, panels, as well as single sided veneered or plastic-coated board, Without possibility of kick back, especially appropriated for cutting boards, in carpentry works & construction site.
Bore: Available all size and kind upon request, such as 5/8", 1", 20mm, 22.23mm, 25mm, 30mm, 35mm, ect.
Teeth: Teeth number could be adjusted upon request.
Hook angle: Could be adjusted upon request
Advantage:
1. High bending resistance makes Carbide tip difficult to be broken.
2. Internal stress removed, deformation will not happen after long time using.
3. The design of saw blade angle and saw blade assembly enable cutting surface to be smooth and noise to be reduced.
4. We carry out product inspections according to strict standards to ensure a high quanlity product.
Services
1. Your inquiry related to our products or prices will be replied in 24hours.
2. OEM & ODM are welcomed, OEM brand is available.
3. Laser cutting wire can add according to your requirement, it can abate the noise when cutting the wood.
4. Your logo and label can be showed on our products.
Promises
1. Only provide good quality products.
2. Offering the most favorable prices.
3. Offering the lowest freight cost and the fastest service.
| Outer diameter(ΦD)mm |
Tooth Width(B)mm |
Hole diameter(Φd)mm |
Teeth number(Z) |
| 180 |
3.0 |
25.4/30 |
36 |
| 200 |
3.0 |
25.4/30 |
40 |
| 230 |
3.0 |
25.4/30 |
40 |
| 255 |
3.0 |
25.4/30 |
60 |
| 255 |
30 |
25.4/30 |
80 |
| 300 |
3.2 |
25.4/30 |
24 |
| 300 |
3.2 |
25.4/30 |
28 |
| 300 |
3.2 |
25.4/30 |
48 |
| 300 |
3.2 |
25.4/30 |
60 |
| 350 |
3.5 |
30 |
32 |
| 350 |
3.5 |
30 |
54 |
| 400 |
3.5 |
30 |
60 |
Factory Showing
Audited Supplier 
){kind=link}